Flat Window Awnings offer the traditional modern look. The window awning system allows the awnings to be set at any angle. The rear receiving channel is affixed and the awning simply clicks in and fastened. You can set the awning to any pitch to suit your needs.The awnings come in the following projections of 960mm, 1160mm, 1450mm and 1600mm. When you need an awning greater than this, you will need to go to a patio cover.
The awnings come in a variety of colour choices where you can mix and match. There are five (5) sheet choices of 8mm twin walled polycarbonate and four (4) aluminium joining bar colours. However, for an extra charge, we are able to powdercoat to any special colour.
Each polycarbonate sheet with the H Bar is 725mm centre to centre. So 2 sheets starts at 1500mm wide and then simply add 725mm for each panel to determine the width you need. The sheets have UV protection on both sides of the sheets for greater protection.
The arm attachment is a simple bracket system. Simply fastened the bracket to the wall and the bracket slips into the 38mm RHS arm. The arms can be cut to any size on site to determine your pitch. Please see Tech Info for our installation guides.
For further information, please contact the office on (02) 9674 2500 and ask for sales.